Rubber Coated Neodymium Magnets with External Thread - Magnetic Systems with External Screw ThreadThis series consists of permanent-manetic holding systems mainly used on sensitive surfaces as, for instance, on steel sheet with surface coatings like paint,chrome, nicke, etc. Due to the rubber-ype onsistengy of Santoprene, the sensitive surfaces are protected against scratches (provided the surfaces are clean)Moreover, strong friction forces sideways for resistance to displacement are achieved due to the favorable friction coeficient of Santoprene.
Material :
Rubber Coated MagnetsType :
Rubber Coated MagnetsApplication :
for Light Bar Mirror Camera ToolTolerance :
+/-0.05mmShape :
Disc /RoundWorking Temp. :
80 degreeColor :
ColorCoating :
Rubber CoatedGrade :
n35 n38 n40 n42 n45 n52 gradeRubber Coated Neodymium Magnets with external thread - Magnetic systems with external screw thread. This series consists of permanent magnetic holding systems that are mainly used on sensitive surfaces such as steel sheet with surface coatings such as paint, chrome, nickel, etc.. Due to the rubber-like consistency of Santoprene, the sensitive surfaces are protected against scratches (provided the surfaces are clean).Furthermore, due to the favorable friction coefficient of Santoprene, strong lateral friction forces are achieved for resistance to displacement.
Round neodymium magnet system with rubber coating and external thread. The rubber coating provides protection to all surfaces and increases adhesion.
These systems are used on delicate surfaces. The rubber coating prevents scratching and discolouration. In addition, the rubber coating improves the slip resistance.
Zinc plated body coated with SANTOPRENE, neodymium magnetic core, anisotropic, working temperature max. +60°C
The holding force is measured at room temperature (20) on a polished 10 mm thick medium steel plate by pushing the magnet vertically from the surface (1 kg * 10 N). In exceptional cases, the values given may vary by up to 10%, but in general they will be exceeded.
We also offer individual solutions as an alternative to the standard!
》Other colours rubber coating
》 Rubber coating harder or softer
》printable rubber coat
The holding forces are ascertained using an even polished plate of Stainless stee SS304 material with a thicknes of 10 mm bythe vertical withdrawal of themagnet at room temperature. Smal cracks in the magnet materia do not affert the hoding force. Deviations up to minus 10 % are possible in some instancesThe data given relates to minimum values which are normally exceeded. plastic over molded ferrite magnets.
Technical Details
| Type | Permanent |
|
Composite
|
Neodymium iron boron
|
|
Shape
|
Pot / Cup Shape, external thread
|
|
Application
|
Industrial Magnet
|
|
Processing Service
|
Cutting, Punching, Moulding
|
|
Product Name
|
Ruber Coat Magnet
|
|
Size
|
Customized Size
|
|
Max Working Temperature
|
80-200C
|
|
Sample
|
Avaliable
|
1.Much Stronger Neodymium Rubber Coated Magnet - D43 mounting magnets are coated with rubber to protect inside magnets from splitting, avoid scratching and slipping on smooth surfaces, especially enhance the bearing capacity of lateral load.
2.M6 Threaded Studs Much More Compatible - Rubber-coated neodymium magnet is adopted as standard M6 male thread stud, which is compatible with many kinds of hardware assembly. Anti-loose Screw Nut with non-slip rubber layer inside is more convenient.
3.Waterproof for Outdoor Use - The rubber-coated stud magnets consist of NdFeB magnets with strong magnetic property, Ni and rubber triple-layer, the exterior rubber coating is waterproof & wear-resistant for outdoor use.
4.Easy to Install - Directly screw into the threaded hole of the fixed object, our black mounting magnets are fit for installing camera bracket, video recorder bracket, light bar, hardware equipment or other tools.
Other Models
Application:
Workshop
Magnetic hook is also called strong magnetic hook, magnet hook, magnetic hook, magnet stone hook and so on. The core component of the magnetic hook are Ndfeb magnet and iron shell, and it is equipped with Q235 hook, which is used to adsorb/fix/hang various objects with iron parts. When the magnet is loaded into the iron shell, the magnetic circuit has a concentrated effect, so that the magnetic force of the magnet is greatly enhanced, which can absorb dozens or even hundreds of kilograms of heavy objects, at the same time, the iron shell has a protective effect on the magnet against crash
Strong Mounting Magnets Stud Magnet Black Rare Earth Magnets for Light Bar Mirror Camera Tool. The rubber-coated stud magnets consist of NdFeB magnets with strong magnetic property, Ni and rubber triple-layer, the exterior rubber coating is waterproof & wear-resistant for outdoor use.
Rubber coated magnets are very suitable for outdoor and indoor use. Due to its high slip resistance, this type of magnet is typically used for fixing and installation applications. Rubber coated magnets have different designs, such as external threads, internal threads, countersunk holes, and screw holes.
The rubber coated magnet is composed of neodymium iron boron arranged in a certain magnetic circuit to form a powerful magnet inside. The outer part is sealed with TPE rubber and treated with rubber to prevent scratches on the surface of the adsorption surface, while also protecting the strong magnet from damage, increasing its service life
Rubber coated magnets, also known as rubber coated suction cups or rubber coated suction components, are composed of sintered neodymium iron boron magnets, magnetic conductive stainless steel plates, and rubber shells. The rubber casing can minimize damage and corrosion of the magnet.
Manual measurement, please allow slight errors on size. The color may exist slight difference due to different screen displays. Small parts included, please keep away from children in case of choking risk. Rubber magnet base is used for fixing the roof advertising light box, broadcast, horn, etc., wedding car flower plate, camera, factory equipment installation and fixing
Rubber coated magnet has high friction, and ordinary coatings are prone to slipping when adsorbed on smooth surfaces, but rubber coatings do not. Rubber coated magnets can work normally at high temperatures up to 80 degrees Celsius and low temperatures down to -40 degrees Celsius. The common colors are mostly black, but they can also be adjusted to blue, yellow, green, and other colors as needed.
Magnetic hooks can be used for household, commercial, industrial, and technological applications. Magnetic hooks can be used to hang keys, pictures, indoor tools (such as scissors and knives), cleaning equipment (such as brooms and mops), clothes hanging on hangers, etc. at home. Magnetic hooks can also be used to hang lights, wires, cables, tools, banners, signs, etc.
If you have questions or suggestions, please leave us a message, we will reply you as soon as we can!
IPv6 network supported
