The holding forces are ascertained using an even polished plate of Stainless stee SS304 material with a thicknes of 10 mm bythe vertical withdrawal of themagnet at room temperature. Smal cracks in the magnet materia do not affert the hoding force. Deviations up to minus 10 % are possible in some instancesThe data given relates to minimum values which are normally exceeded. plastic over molded ferrite magnets.
Material :
Rubber Coated MagnetsType :
Rubber Coated MagnetsApplication :
for Light Bar Mirror Camera ToolTolerance :
+/-0.05mmShape :
Disc /RoundWorking Temp. :
80 degreeColor :
ColorCoating :
Rubber CoatedGrade :
n35 n38 n40 n42 n45 n52 gradeRubber Coated Neodymium Magnets with External Thread - Magnetic Systems with External Screw Thread.This series consists of permanent-manetic holding systems mainly used on sensitive surfaces as, for instance, on steel sheet with surface coatings like paint,chrome, nicke, etc. Due to the rubber-ype onsistengy of Santoprene, the sensitive surfaces are protected against scratches (provided the surfaces are clean)Moreover, strong friction forces sideways for resistance to displacement are achieved due to the favorable friction coeficient of Santoprene.
Round neodymium magnetic system with rubber coating and externa threaded pinexterna thread. The rubber coating protects al surfaces and increases theadherence.
These systems are used especialy on delicate surfaces. Due to the rubber oating ocurs neither scraches nor disco oration. Moreover the sip resistance isimproved thanks to rubber coating.
Galvanized body coated with SANTOPRENE, neodymium magnetic core, anisotropic, working temperature max. +60°C
The hoding force is determined atroom temperature (20 on a polished plate made of mid steel with a thickness of 10 mm by puling the magnet verticalyfrom the surface (1 kg * 10 N). A deviation of-10% in the stated values is possible in exceptional cases. ln general, the value wil be exceeded.
Alternative to the standard we also offer individual solutions!
》Other colours rubber coating
》 Rubber coating harder or softer
》printable rubber coat
Technical Details
Type | Permanent |
Composite
|
Neodymium iron boron
|
Shape
|
Pot / Cup Shape, external thread
|
Application
|
Industrial Magnet
|
Processing Service
|
Cutting, Punching, Moulding
|
Product Name
|
Ruber Coat Magnet
|
Size
|
Customized Size
|
Max Working Temperature
|
80-200C
|
Sample
|
Avaliable
|
1.Much Stronger Neodymium Rubber Coated Magnet - D43 mounting magnets are coated with rubber to protect inside magnets from splitting, avoid scratching and slipping on smooth surfaces, especially enhance the bearing capacity of lateral load.
2.M6 Threaded Studs Much More Compatible - Rubber-coated neodymium magnet is adopted as standard M6 male thread stud, which is compatible with many kinds of hardware assembly. Anti-loose Screw Nut with non-slip rubber layer inside is more convenient.
3.Waterproof for Outdoor Use - The rubber-coated stud magnets consist of NdFeB magnets with strong magnetic property, Ni and rubber triple-layer, the exterior rubber coating is waterproof & wear-resistant for outdoor use.
4.Easy to Install - Directly screw into the threaded hole of the fixed object, our black mounting magnets are fit for installing camera bracket, video recorder bracket, light bar, hardware equipment or other tools.
Other Models
Application:
Workshop